1st STEP PROTECTION is a water based stone installation treatment, specially formulated to help prevent grout, cement and general dirt residue stains during installation works, before final anti stain protection. Product will not change the natural aspect of the stone or create any type of film, allowing permeability vapour moisture to escape and is UV resistant.

Directions for use: Apply one coat of 1ST STEP PROTECTION evenly by spraying or by brush. On very absorbent surfaces apply a second coat allowing sufficient time (approx 3-4 hours drying time) between each a pplication. Curing Time 24-48 hrs., depending on weather conditions. 

Coverage per lit:
High PorosityStone,Sandstone 3-5 m2,
Medium Porosity, Honed Stone, Limestone 8-12 m2
Low Porosity Stone 20-25 rn2,

Art No. : 66009, Vol : 1 Ltr., Pcr x Cr : 12